Versatile epoxy resin for a wide variety of sealing and laminating tasks.A 100% solids multipurpose epoxy resin for sealing gel coat and fiberglass laminate. This 2-part, high-build,clear epoxy coating lets you see that all dry fibers are saturated and sealed. Can be used in conjunction withInterProtect 2000E or InterProtect 3000. Standard Hardener is formulated for most conditions above 60F. Mix 4parts resin to 1 part of hardener. Pumps are available for gallon packs.Key FeaturesHigh-strength and durabilityEasy to sandSolvent-free and low odorGreat for sealing gelcoatLow viscosity makes it easy to mixPhysical DataType: Two-part epoxyAvailable colors: HT9000-ClearComponents:2Coverage: 559.8sq.ft./gal.Solids by volume: 100%VOC: 0 g/ltMix ratio: 4:1 mix ratioPot Life:@77F; 30ApplicationApplication Method: Brush, roller, DO NOT SPRAYNumber of coats recommended: VariableConverter/Curing agent: Resin HT9000 / Cure HT9001 Fast, HT9002 Standard, HT9003 SlowApplication temperature Min. /Max. Range: 10C/50F and maximum 35C/95F.Cleaner: Fiberglass Solvent Wash 202More informationFor detailed application instructions see the Epiglass Epoxy Resin Data sheet. NOTE: Manufacturer datasheets are subject to revision. Linked data sheets are believed to be accurate at the time of publication.